When a homeowner discovers there is water leaking into their home, they will most likely want to find the area on their roof where it is seeping through to the other side. Since getting on a rooftop is a safety hazard, many resort to calling a roofing contractor in Brookfield, WI to do this task. Here are some of the steps a contractor would take in finding the source of the problem.
A Complete Evaluation Would Be Done To Find Damaged Shingles
First, the contractor would do a complete analysis of the shingles to determine whether some are in need of replacement. Curling or crumbling shingles would allow for water to accumulate underneath them, leading to saturation of the roofing paper and wood. Shingles that appear to be affected with mold or mildew would be looked at in detail as water may have pooled in this area several times, leading to the saturation of the wood underneath.
A Test Would Be Done To Find The Entryway
If the shingles appear to be in good shape, the roofing contractor would need to do a test to find the point of entry. This can be done by bringing a garden hose to the rooftop and allowing water to run for several minutes in one location. If water does not trickle into the home, the hose can be moved to a new location. This is repeated until water is found coming into the home in the area where the homeowner had noticed it in the past. This will give the contractor a better idea which area will need to be assessed more closely.
A Check Of Areas Around Protruding Features
The roofer will take a look at the flashing around chimneys, skylights, vent outlets, and other protrusions on the rooftop to see if it appears to be deteriorating. If there is rust present, the flashing will be removed, and a closer look will be given of the underlying boards.
It is important to find a roofing contractor in Brookfield, WI to do proper repair work when a roof leaks. Take a look at WaukeshaRoofingWI.net to find out more about the services they provide and to get an estimate if needed.
