When shingles are missing or loose, homeowners may easily replace or readjust them. While on the roof, it is important to inspect the other shingles closely to find out if the shingles could cause difficulties in the future. To make sure this is done properly, it is best to hire Roofing Contractors in Louisville KY.
How to replace tiles
To fix bad tiles, people will need a lever, galvanized nails (roofing), a hammer, roofing cement, a knife, a silicone gun, silicone putty, a screwdriver, a nail picker, and some replacement tiles. If they do not have replacement tiles, grab one of the old tiles and go to a local hardware store and try to find a tile like it. A tile package is not expensive and is likely to be sufficient for repairs.
Before getting on the roof and searching for loose or damaged tiles, replace the tiles you know to be bad before continuing maintenance work. If a person is not comfortable with this type of work, they should hire Roofing Contractors in Louisville KY.
Simple steps to replace tiles
Remove the tiles just above the missing or flawed tiles. Make sure to go a couple of rows up and do not damage the good shingles when taking them out. Take a nail extractor or screwdriver to lift the nails at the base point.
When a tile is loose, it tends to dry out. And, after a while, the edges of the tile may begin to curl. Shingles like this are likely to need further repairs in the future. From the bottom going up, put a new tile, making sure that it overlaps the bottom one.
Going forward, follow the same row of tiles until the process is finished. Folks can lock the roof tiles down using galvanized nails. If the holes cannot be reused, try using roofing cement. People should also cover the head of the nail with roofing cement.
Replacing shingles
When you reach the last tile, cut the nail strip on the top with a knife. Put roofing cement on the back of the tile and slide the replacement tile under the tile above it. Firmly press the two shingles together. Get more information here.
